Patient Resource

10Rx Information Guide

10Rx Information Guide

How to Self-Inject Medication

How to Self-Inject Medication

Here is a link for a video on how to administer your injection, or you can follow the steps below: https://youtu.be/w7eudNuzKuw?si=IFEFBfbX5OIStx4x

  1. Wash your hands and gather your supplies, including the medication vial, syringe, and alcohol swabs.

  2. Clean the top of the vial with an alcohol swab and allow it to dry.

  3. Pull back the syringe plunger to draw in air equal to your prescribed dose in units.

  4. Insert the needle into the vial and push the air in, then turn the vial upside down with the needle still inside.

  5. Slowly pull back on the plunger to draw the prescribed number of units into the syringe, checking for air bubbles and tapping them out if needed.

  6. Choose an injection site such as the abdomen (at least two inches away from the belly button), the front of the thigh, or the upper arm.

  7. Clean the skin with an alcohol swab and allow it to dry.

  8. Gently pinch the skin, insert the needle at a 90-degree angle, and slowly press the plunger to deliver the medication.

  9. Remove the needle and dispose of it properly in a sharps container.

  10. Rotate injection sites each week to avoid irritation and support proper absorption. You can alternate between the left and right side of your abdomen or rotate between the abdomen, thigh, and upper arm to keep a consistent pattern